| Dimensions (L x W x H) | 506 mm x 398.7 mm x 261 mm (19.92 in x 15.70 in x 10.28 in) |
| Weight | 23.5 kg |
| Maximum/Minimum Width (Label and Liner) | 114/20 mm (4.5/0.79 in) |
| Minimum Label Length | •Tear-Off Mode: 3.0 mm (0.12 in) •Self-Strip Mode: 12.7 mm (0.5 in) •Rewind Mode: 6.0 mm (0.24 in) |
| Thickness (Label and Liner) | 3 mil to 10 mil |
| Roll Max. Diameter | 80 mm (3.15 in) |
| Core ID | 25 mm (1 in) |
| Maximum/Minimum Width (Ribbon and Core) | 110/51 mm (4.33/2.0 in) |
| Ribbon Length | 450 m (1,476 ft) |
| Print Method | Thermal Transfer / Direct Thermal |
| Verifier Scan Resolution | 600 dpi |
| Maximum Print Speed | 25–150 mm/s (1–6 ips) |
| Maximum Verification Speed | 150 mm/s (6 ips) |
| Maximum Width | 105.6 mm (4.16 in) |
| Maximum Verification Length | 304.8 mm (12 in) |
| Maximum Voiding Length | •Batch Print: 152.4 mm (6 in) •On Demand Mode: 304.8 mm (12 in) |
| Maximum Number of Barcodes per Label | 32 |
| Verification Reports | Statistics and detailed reporting is available through printer web page, USB thumb drive, Verifier Integration Interface (VII), or FTP/SFTP |
| Operating Temperature | +5°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Operating Humidity | 20% to 85% non-condensing |
| Storage Humidity |
| Flash Memory | 256 MB Flash memory 1 GB DDR3 SDRAM Multi-GB USB memory device (FAT16/FAT32) |
| Media Type | Gap, black mark, tag, hole, notch, or continuous |
| INTERFACES | •USB 2.0 Host (x2) •USB 2.0 Device •Ethernet 10/100 Mbps •RS-232, up to 115.2 KB/s •Bluetooth LE (for Print Set MC only) •Static NFC tag (Bluetooth MAC address) |
| USER INTERFACE LANGUAGES | On Color Touch LCD and Web Interface |
| Printer Command Languages | •Fingerprint (FP) •Direct Protocol (DP) •Intermec Printer Language (IPL) support on 203 dpi and 300 dpi only ZSim2 (ZPL-II) DPL XML-enabled for SAP® AII and Oracle® WMS |
| Barcode Verification Modes | •Linear (1D) barcode verification conforming to ISO/IEC 15416-2016 •2-Dimensional (2D) barcode verification conforming to ISO/IEC 15415- 2011; Read/No Read Barcode verification |
| Minimum Linear (1D) Bar Width | 10 mils (0.254 mm) |
| Minimum 2D Cell Size | 10 mils (0.254 mm) |
| ELECTRICAL | 200 watt rated power supply with PFC , 50 - 60Hz |
| Accessories | •Verifier Calibration Card (applicable to PX940 Verifier Version only) •Wireless Board (IEEE 802.11 a/b/g/n/ac) •Parallel Board (IEEE 1284) •Applicator Interface Board •Industrial Interface Board •Peel Off module (factory configurable) •Rewinder module (factory configurable) •1.5 in non-collapsible inner core diameter on media supply and rewinder take-up (factory configurable) |
